Nordcap Y2 series Gebrauchsanleitung Seite 17

Note: Opening the door for a period exceeding 2 minutes causes an automatic cycle shutdown.
To return to the main MENU press
4.7.1 Product Probe Release
(except in AB3)
MNS00054.02
PRT
Instruction Manual
Choose the desired program using the keys
Press to start the Customized Cycle.
Stop the cycle: with the keys
corner of the display, followed by
.
In the main MENU select, with the keys
Then .
The probe will enter into heating mode for two minutes or until it reaches 4ºC.
N.º MNS00054.02
.
select , located in the lower right
.
, the option PROBE HEATING.
17/57