Troubleshooting; Technical Specifications - SOLIS PERFECT AIR 7219 Bedienungsanleitung

TROUBLESHOOTING

s
Problem Possible cause
Little – The function Sleep
humidification Speed resp. 40 % or
power. 45 % has been selected.
– The water in the water
GB
tub is very cold.
No – The power plug is not
humidification connected to the socket.
power.
– The warning light Empty
Water lights up.
An independ- – Dirt has collected in the
ent humidity air outlet or inlet open-
switch meas- ing.
ures a differ-
ent humidity
value from the
display on the
appliance.
– The appliance is placed
near a window or an
open door.
The escap- – There is old water in the
ing air smells water tub / water tank.
unpleasantly.
112
Solution
– Select a higher air humidity, e.g.
60 % or 70 % and a higher venti-
lation speed, e.g. High Speed or
Normal Speed.
– Select the air humidity 60 %
or 70 %. After some time,
the humidification power will
increase.
– Firmly connect the power plug
to the socket.
– Switch the appliance off.
Fill the water tank up with
fresh tap water, then switch
the appliance on again.
– Clean the air inlet and outlet
openings. Note: Even within one
room, different values for humid-
ity can be measured. The value
on the appliance refers always to
the humidity exactly by the appli-
ance.
– Place the appliance in a spot free
of draft.
– Drain the water and clean the
appliance as described in
" Cleaning and maintenance " .
Fill the water tank with fresh tap
water.
T E CH NI C AL SPE C I FI C A TI ONS
s
Model no. UM 585M, Type 7219
Description Air humidifier
Voltage / Frequency 220 V~ / 50 Hz
Output 25 watts
Noise level  53dB (A) (average)
Water tank capacity 5.0 litres
Dimensions (W x H x D) approx. 39.5 x 38.0 x 18.5 cm
Weight approx. 5.7 kg
Max. humidification 350 ml / hour
Technical changes reserved.
GB
113