Test Strip - Glucofast DUO PZN 15405027 Gebrauchsanweisung

Display Screen
1 GLU
2
3
4
DAY
5
AVG
6
M
1. Glucose Symbol
2. Test Result
3. Error Message
4. Low Battery Symbol
5. Day Average
6. Memory Mode
7. Date/Time
8. HCT Level
9. Measurement Unit
40
14 13 12
Gen
11
AC PC QC
10
9
mmol/L mg/dL
88
HCT
%
8
AM PM
7
10. Alarm Reminder
11. Auto QC Mode/QC Mode
QC- control solution test
Measuring Mode
AC – before meal
PC – after meal
Gen – any time of day
12. Buzzer Symbol
13. Test Strip Symbol
14. Blood Drop Symbol

Test Strip

1. Absorbent Hole
Hold the drop of blood on this field. The blood is auto-
matically moved in slowly.
2. Confirmation Window
Provides if sufficient blood has been sucked.
3. Test Strip Handle
At this point, the test strip can be touched while inserting it.
4. Contact bars
Insert this end of the test strip into the meter and push it in
until it stops.
ATTENTION
The front side of test strip should face up when in-
serting test strip.
Test results might be wrong if the contact bar is not fully
inserted into the test slot.
NOTE
The Glucofast Duo monitor should only be used with Glucofast
®
other test strips with this meter can produce inaccurate results.
Front Back
Duo Test Strips. Using
®
41