Dismoun Ng, Return And Disposal; Dismoun Ng; Return; Disposal - LR-Cal TLDMM 2.0 Bedienungsanleitung

TLDMM
MANUAL
TLDMM
In the event that problems should arise in the calibra on procedure, it is possible to return to
the factory calibra on using the

10. Dismoun ng, return and disposal

WARNING!
Residual media in the dismounted instrument can result in a risk to persons,
the environment and the equipment. Take sufficient precau onary measures.

10.1 Dismoun ng

Only disconnect the test and calibra on installa ons once the system has been depressurised!

10.2 Return

WARNING!
Strictly observe the following when shipping the instrument:
All instruments, delivered to DRUCK & TEMPERATUR Leitenberger GmbH, must
be free from any kind of hazardous substances (acids, bases, solu ons, etc.).
When returning the instrument, use the original packaging or a suitable transport package.
To avoid damage:
1. Wrap the instrument in an an sta c plas c-film.
2. Place the instrument, along with the shock-absorbent materila, in the packaging.
Place shock-absorbent material evenly on all sides of the transport packaging.
3. If possible, place a bag, containing a desiccant, inside the packaging.
4. Label the shipment as transport of a highly sensi ve measuring instrument.

10.3 Disposal

Incorrect disposal can put the environment at risk.
Dispose of instrument components and packaging materials in an environmentally compa ble
way and in accordance with the country-specific waste disposal regula ons.
This calibrator and it's equipment must not be disposed of in domes c waste.
The disposal is carried out by return to the manufacturer or by the
corresponding municipal authori es (see EU direc ve 2002/96/96/EC).
Tel. +49 (0) 7121-90920-0 • Fax +49 (0) 7121-90920-99 •
2.0 Referezdruckmessgerät
2.0 reference pressure gauge
password 3125
DRUCK & TEMPERATUR Leitenberger GmbH • Bahnhofstr. 33 • D-72138 Kirchentellinsfurt •
.
DT -Info@Leitenberger.de • www.
46
LR -Cal.net • www.druck-temperatur.de
GERMANY