Software - Pce Instruments Pce-Hvac Bedienungsanleitung

5.4

Software

5.4.1 Installation
To install the drivers and the software, follow these steps:
1. Connect the device to your PC by using the supplied data cable.
2. Put the software CD in the CD-ROM drive of your PC.
3. Wait for the Windows AutoPlay function or access the CD-ROM drive and run the
"SETUPGUIDE.exe" file.
4. The software and the driver installers start automatically.
5. Install the drivers first by clicking on "Install" in the driver installer. Follow the
instructions on the screen.
Driver installer
Software installer
© PCE Instruments
32