Declaration Of Incorporation Of Partly Completed Machinery; Electricity Supply - Linak DPG1B Bedienungsanleitung

DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY

Herewith declares that LINAK DESKLINE
Control Boxes CBD4, CBD6S
And
Linear Actuators LA31, DB4, DB5, DB6, DB7, DB9, DB12, DB14, DB16, LA23
Lifting Columns DL1A, DL2, DL4, DL5, DL6, DL7, DL8, DL9, DL10, DL11, DL12, DL14, DL15,
DL16, DL17, LP2, LP3, BASE1
And
Desk Panels DP, DPA, DPB, DPH, DPF, DPT, DP1C, DP1K, DP1L, DP1V, DP1U, WDPL1
RF Controls HB10, HB20, RFR and RFT
And
Accessories SLS
comply with the following parts of the Machinery Directive 2006/42/EC, ANNEX I, Essential health and
safety requirements relating to the design and construction of machinery:

1.5.1 Electricity supply

The relevant technical documentation is compiled in accordance with part B of Annex VII and that this
documentation or part hereof will be transmitted by post or electronically to a reasoned request by the
national authorities.
This partly completed machinery must not be put into service until the final machinery into
which it is to be incorporated has been declared in conformity with the provisions of the
Machinery Directive 2006/42/EC where appropriate.
Nordborg, 2014-04-10
LINAK A/S
John Kling, B.Sc.E.E.
Certification and Regulatory Affairs
Authorized to compile the relevant technical documentation
Original Declaration
LINAK A/S
Smedevænget 8
DK - 6430 Nordborg
®
products as characterized by the following models and types:
Seite 47