Linak DPG1B Bedienungsanleitung Seite 31

Storing the memory positions
Memory positions 1 and 2
The DPG1Bhave a "store memory" button to the right symbolised with a star.
Adjust the desk to a preferred position and press the "Star"-button for 2 seconds. The light
strip will now blink white two times to indicate that saving the position is in progress. When
the light strip becomes static white, the position is saved.
Driving to memory positions
After storing the memory positions, the positions can be reached simply by tilting the
DPG. Tilt and hold - when a stored position is reached, the desk stops. This way the user
can easily change between sitting and standing position without looking at the DPG in the
meantime. Furthermore, when the desk stops at a memory position, the user can release
the DPG and tilt again immediately to move past a memory position.
Seite 31