Disposal Of Batteries; Linak Application Policy - Linak Dpg1B Bedienungsanleitung

Disposal of batteries

"Details regarding safe disposal of used and leaking batteries:
Batteries should be disposed in accordance with appropriate federal, state and local regulations. LINAK
recommends that used or leaking batteries are disposed through local recycling system. Please do not throw
used or leaking batteries in normal household waste or in nature. This will cause damage to the enviroment.
How to deal with leaking batteries
Leaking batteries should be disposed as described above.
If leaking batteries are discovered in the product, the batteries must be removed at once to minimise damage to
the product.
If leaking batteries are left in the product, it become defective.
It is recommended to use plastic gloves when handling leaking batteries. The contents of a leaking batteries can
cause chemical burns and respiratory irritation.
If exposed to the contents of a leaking battery, please wash with soap and water. If irritation persists, please
seek medical attention. In case of eye contact, please flush eyes thoroughly with water for 15 minutes and seek
medical attention."

LINAK APPLICATION POLICY

The purpose of the application policy is to define areas of responsibilities in relation to applying a LINAK
product defined as hardware, software, technical advice, etc. related to an existing or new customer
application.
LINAK products as defined above are applicable for a wide range of applications within the Medical, Furniture,
Desk and Industry areas. Yet, LINAK cannot know all the conditions under which LINAK products will be
installed, used, and operated, as each individual application is unique.
The suitability and functionality of the LINAK product and its performance under varying conditions (application,
vibration, load, humidity, temperature, frequency, etc.) can only be verified by testing, and shall ultimately be
the responsibility of the LINAK customer using any LINAK product.
LINAK shall be responsible solely that the LINAK products comply with the specifications set out by LINAK and it
shall be the responsibility of the LINAK customer to ensure that the specific LINAK product can be used for the
application in question.
iPod touch, iPhone, and iPad are trademarks of Apple Inc., registered in the U.S. and other countries.
"Made for iPod touch", "Made for iPhone," and "Made for iPad" mean that an electronic accessory has been designed to
connect specifically to iPod touch, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple perfor-
mance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory stan-
dards. Please note that the use of this accessory with iPod touch, iPhone or iPad may affect wireless performance.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Ascion, LLC is under
license. Other trademarks and trade names are those of their respective owners.
Seite 46