Scan; Dtmf Calls - Kenwood TK-7360 Bedienungsanleitung

S D /A
CAN ELETE
You can add and remove zones and/or channels/group IDs to and from your scan list.
1 Select your desired zone and/or channel/group ID.
2 Press the key programmed as Scan Delete/Add to remove a channel or press and hold the key
for approximately 1 second to remove a zone.
• When a channel is added to scan, the
• When a zone is added to scan, the
S R
CAN EVERT
The Scan Revert channel is the channel selected when you press the PTT switch to transmit during
scan. Your dealer can program one of the following types of Scan Revert channels:
• Selected: The last channel selected before scan.
• Selected + Talkback: Same as "Selected", plus you can respond to calls on the
channel at which scan is paused.
• Priority: The Priority channel.
• Priority + Talkback: Same as "Priority", plus you can respond to calls on the channel at
which scan is paused.
• Last Called + Selected: The last channel on which you receive a call or the last
channel selected before scan, whichever operation occured latest.
Note: To make DTMF calls, you must use an optional microphone with a DTMF keypad.
M D
ANUAL IALING
1 Press and hold the PTT switch.
2 Enter the desired digits using the keypad.
• If Keypad Auto-PTT is enabled by your dealer, you do not need to press the PTT
switch to transmit; you can make the call simply by pressing the keys.
A
UTODIAL
Autodial allows you to quickly call DTMF numbers that have been programmed onto your transceiver.
1 Press the key programmed as Autodial.
2 Press / (if the key assignment list selection is confi gured as "Enabled") or <B/C> to select an
autodial list number.
• You can also enter a number from 01 ~ 16 directly using the keypad.
3 Press the PTT switch to make the call.
■ Storing an Autodial Entry
1 Press the key programmed as Autodial Programming.
8
DD

DTMF CALLS

icon appears on the display.
icon appears on the display.