Niko 10-572 Bedienungsanleitung Seite 24

10-572 / 10-573
Read the complete manual before carrying out the installation and activating the system. Keep this manual for future reference.
1. DESCRIPTION
The luxury internal video units 10-572 (for surface-mounting) and 10-573 (for flush mounting) are part of the Access Control range. Both internal video units
are part of a system with one or more external units and one power supply.
The internal video unit allows you to:
• open a door
• make a call
• see the visitor
• deactivate the ring tone
• switch the lighting on/off
• display camera images
• record camera images
The call settings can be changed via the menu call settings (§ 6.1).
2. COMPONENTS
Screen
1
Speaker
2
Microphone
3
Door opener key
4
Speech key
5
Ring tone key
6
Record key (only applicable
7
to the optional recording module)
Free function key
8
Camera key
9
Navigation keys
10
Menu key
11
Surface-mounting box (10-572)
12
Flush-mounting box (10-573)
3. INSTALLATION
3.1. Cabling
The internal video unit is wired with 6-wire cable, with a twisted cable for optimal image quality. The diameter of the conductors determines the maximum distance
that can be bridged between the power supply and the internal video unit, or between the power supply and the external video unit.
Cable diameter
0.5 mm (e.g. UTP)
0.6 mm (e.g. TPVF)
0.8 mm (e.g. SVV, TVVF, JYSTY ...)
Note:
• The above maximum distances apply if only one device is active. If 2 internal video units operate in parallel using the same cable, divide the maximum distance
by 2. For 3 internal video units, divide by 3, etc.
• When using power supply 10-806, you can connect up to six internal video unit within the same installation (line in, line out). When using power supply 10-801
in combination with power supply 10-805-01 this number can be increased to maximum 20 internal video units (line in, line out).
24
1
11
12
Maximum distance
45 m
60 m
100 m
10 9 8 7 6 5 4
2
3
EN