Inhaltsverzeichnis
Werbung
1. Intended use
The intended use of this power tool is the sanding
of large areas of drywalls as a preparation before
painting or wallpapering using suitable abrasive
sheets.
This power tool is neither suited for the
preparation of small areas, corners and edges,
nor for the removal of wallpaper and the grinding
of ceilings and wet grinding.
Do not use the power tool for cutting or roughing
or polishing. Do not use it together with wire
brushes. Do not treat asbestos-containing
materials with this power tool.
This power tool is solely intended for private use.
Do not use the power tool for any other purpose
than for the intended one. Any other use beyond
the intended use is improper. For any resulting
damage or injury, the user/operator is held liable,
not the manufacturer.
2. General power tool safety
instructions
1) Work area safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gasses or dust. Power tools
create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating power tool. Distractions can cause you
to lose control.
2) Electrical Safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets
will reduce the risk of electric shock.
22
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
f ) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk
of electric shock.
3) Personal Safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power
tools may result in serious personal injury.
b) Use personal protective equipment. Always
wear eye protection. Protective equipment
such as dust masks, non-skid safety shoes, hard
hat or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the
switch is in the off-position before connecting to
power source and or battery pack, picking up or
carrying the tool. Carrying power tools with your
finger on the switch or energizing the power
tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before
Werbung
Inhaltsverzeichnis
