Eldom glade DA29N Bedienungsanleitung Seite 9

GENERAL DESCRIPTION
1. Dry/steam power selector
2. Steam button
3. Spray button
4. Handle
5. Cord
6. Water –fill
7. Temperature dial
8. Control lamp
9. Spray nozzle
10. Self clean button
11. Water tank
12. Heel rest
13. Soleplate
TECHNICAL DATA
- power: 2000 W
- voltage: 230V~ 50Hz
USING THE IRON
Before first use unfold the cord (5) completely. During initial exploitation there may appear a
harmless odour which has no influence upon the usage of the iron and quickly disappears.
Before connecting to the mains put the iron on the heel rest (12), turn the temperature dial to „0"
setting and dry/steam power selector (1) to setting "0" (no steam).
After plugging in and temperature setting the light of the control lamp (8) comes on. It goes out
when the chosen temperature is reached.
The ironing temperature should be adjusted to the fabric. If the type of fabric is unknown set for
minimal temperature and gradually increase the temperature until a satisfying effect is reached.
DRY IRONING
Put the iron on the heel rest (12), turn dry/steam power selector (1) to setting "0". Before plugging in
or operating turn the temperature dial to "0" setting.
STEAM IRONING
Steam ironing with additional steam function is only possible with high temperature. The highest
temperature is marked on the temperature dial as "MAX". The steam power is regulated by dry/steam
power selector (1).
Additional steam power is obtained by pressing steam button (2) and it facilitates ironing of
exceptionally tough wrinkles.
NOTICE. Steam is hot and there is a danger of burning. The soleplate heats very quickly but it
needs more time to cool down. It should not be touched.
9 EN
INSTRUCTION MANUAL
STEAM IRON DAA29N
3
1
6
10
9
4
2
7
11
13
EN
5
8
12