Declaration Of Conformity; Intended Use; Technical Data; Noise/Vibration Information - Bosch Keo Originalbetriebsanleitung

OBJ_BUCH-1453-003.book Page 12 Monday, January 23, 2012 11:09 AM
12 | English
Symbol Meaning
Reaction direction
Movement direction
Switching On
Permitted action
Prohibited action
Accessories

Intended Use

This power tool is intended for domestic use.
It is for cutting branches and can also be used for the sawing
of wood, soft metal such as copper and plaster board.
It is suitable for straight and curved cuts.
The saw blade recommendations must be observed.

Technical Data

Sabre saw
Article number
Rated voltage
Stroke rate at no load n
0
Tool holder
Stroke
Cutting capacity, max. diameter
– in wood
– in soft metal
Weight according to
EPTA-Procedure 01/2003
Battery Charger
Article number
Input voltage
Charging current
Charging period (battery dis-
charged)
Allowable charging temperature
range
Weight according to
EPTA-Procedure 01/2003
Protection class
Please observe the article number on the type plate of your machine.
The trade names of the individual machines may vary.
F 016 L70 773 | (23.1.12)

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardization documents: EN 60745
(battery powered products) and EN 60335 (battery charg-
ers) according to the provisions of the directives
2011/65/EU, 2006/95/EC, 2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Bosch Lawn and Garden Ltd., PT-LG/ENS,
Stowmarket, Suffolk IP14 1EY, England
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
22.08.2011

Noise/Vibration Information

Measured sound values determined according to EN 60745.
Typically the A-weighted sound pressure level of the product
is 72 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed 80 dB(A).
Keo
Wear hearing protection!
3 600 H61 9..
Vibration total values a
V= 10.8
determined according to EN 60745:
-1
min 0 – 1600
Cutting board: a
Cutting wooden beam: a
SDS
The vibration emission level given in this information sheet
mm 20
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
mm 80
another. It may be used for a preliminary assessment of expo-
mm 7
sure.
The technical specifications of the power tool deviate from
kg 1.05
the test criteria laid out in the standardised test given in
EN 60745.
The declared vibration emission level represents the main ap-
EU 2 609 003 916
plications of the tool. However if the tool is used for different
UK 2 609 003 932
applications, with different accessories or poorly maintained,
AU 2 609 004 762
the vibration emission may differ. This may significantly in-
V 100 – 240
crease the exposure level over the total working period.
mA 500
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
min 180
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
°C 0– 45
Identify additional safety measures to protect the operator
kg 0.088 (EU)
from the effects of vibration such as: maintain the tool and the
kg 0.093 (UK)
accessories, keep the hands warm, organisation of work pat-
kg 0.085 (AU)
terns.
/ II
09
Dr. Eckerhard Strötgen
Engineering Director
PT/ESI
(triax vector sum) and uncertainty K
h
2
=19 m/s , K=6.0 m/s
h
2
=20 m/s , K=3.0 m/s
h
2
,
2
.
Bosch Power Tools