Preparing The Machine; The Controls And The Control Panel - Portotecnica Genius 1300 DP Gebrauchs- Und Bedienungsanleitung

UNPACKING
Unpack your machine with great care, avoiding any manoeuvre
that could lead to damage.
Once you have unpacked it, make sure all parts are in a good
condition. If you notice any damage, DO NOT use the machine
and contact your retailer immediately.
For reasons concerning packaging and transport, some parts
and optional items may be supplied disassembled. To assemble
them, follow the instructions given in this handbook in the
respective sections.
Contents of the package
N° 1 Machine
N° 1 or 2 Side brush
N° 2 Keys for starting
N° 1 Use and maintenance handbook
N° 1 Declaration of conformity
N° 1 Warranty coupon
- - - - Batteries (if purchased)
N° 1 Battery connection kit
N° 1 Battery charger (if purchased)
The DP version also features the operating instructions of the
engine.
If you notice that any of the above are missing, contact your
retailer immediately.
NOTE To prevent it from getting lost during transport, the keys
have been put inside the envelope containing the technical
literature.
Make sure the packaging materials (bags – cartons – pallets –
hooks – etc.) are put
away, out of the reach of children.
Precautions to take before starting the machine:
To facilitate transport, the side brush (or brushes) is not mounted
in its expected working position.
To put it in place, read the – Preparing a new machine – section.

THE CONTROLS AND THE CONTROL PANEL

1) - Brake engagement pedal
2) - Parking brake pedal
3) - Flap raising pedal
4) - Accelerator pedal
5) - Right hand side brush control lever
5A) - Left hand side brush control lever
6) - Seat adjustment lever
English
A) - Selection of displayed data
B) - Display
C) - Key and indicator of work programme 1
D) - Key and indicator of work programme 2
- Key and indicator of work programme 3
E)
F) - Filter shaker ON button
G) - ON-OFF button and aspirator motor indicator
H) - Side brush speed adjustment knob
I) - Waste bin raising button
L) - Waste bin lowering button
M) - Waste bin tipping button
N) - Button to start/stop the engine (Dual Version)
O) - Ignition key
P) - Lever to select the forward or reverse gear
Lights ON-OFF – Horn
Q) - Waste bin "full" indicator (Optional)
R) - Fuel Reserve
- Engine Oil Alarm
S)

PREPARING THE MACHINE

Either in the petrol or in the DP version, the machine calls for a
set of 24 V batteries.
The machine can be supplied in three options:
1. Batteries supplied with the machine, fitted and filled with acid,
ready for use.
2. Batteries supplied and fitted dry (without the liquid electrolyte).
3. Batteries not supplied.
Raise the bonnet carrying the seat by pushing it forward towards
the steering wheel and check which option applies to your
machine.
If the batteries are fitted, open up one of the vent caps of each
battery and check if they are filled with electrolyte.
- 17 -
FORWARD
REVERSE