Cleaning The Device; Cleaning The Condenser - Bartscher 700 series Bedienungsanleitung

Cleaning the device

o After defrosting, wash the device with warm water and a neutral cleaning agent.
Wipe down thoroughly with clean water.
o After washing, dry the device thoroughly.
o Wash the equipment with a neutral cleaning agent and dry when finished. Leave
accessories to dry before replacing them in the device.
o Wash the external surface with a soft, moist cloth.
ATTENTION!
Never use hot water to wash the device!
Never use abrasive washing substances, e.g. scouring powders, substances
containing alcohol or alkaline, thinners or petrol, which could damage plastic
and/or paint.
If the device is to remain unused for a longer period of time:
o remove the plug from its socket;
o remove all food products from the deep freezer;
o defrost the deep freezer;
o wash the device's interior and exterior;
o leave the doors open to allow the deep freezer to dry thoroughly.

Cleaning the condenser

o Clean the condenser at least once a month.
NOTE!
A dirty condenser has a negative impact on the device's functioning and
increases energy use!
o Disconnect the device prior to cleaning
(remove plug!).
o Use a vacuum or hard-bristle brush for
cleaning.
o Wear protective gloves while cleaning.
WARNING! Danger of burns!
The compressor's surface may be very hot when in use.
Do not touch the compressor with bare hands.
- 35 -