Installation And Connection - Bartscher 700 series Bedienungsanleitung

WARNING! Hazard via electrical current!
Avoid contact between the device and water. Do not allow the water to be affected
by rain, dripping water or other forms of moisture. This may lead to damage to the
device or electric shock.
•
Do not keep heavy, poisonous or rusty objects in the deep freezer.
•
Take caution not to damage any part of the cooling system (compressor, etc.) to
avoid a coolant leak.
WARNING!
If coolant does leak from the cooling system, remove the device's plug from the
power source and call the customer service centre.
WARNING! Hazard via electrical current!
The device can cause injuries due to improper installation!
Before installation the local power grid specification should be compared with that
of the device (see type label).
Connect the device only in case of compliance!
Take note of the security advice!

5.2 Installation and connection

CAUTION!
Installation and maintenance operations may only be performed by qualified
professionals!
•
Unpack the device and remove packaging.
•
Leave the device on its pallet.
•
Raise the deep freezer using a pallet jack and place it where it is intended to be
located.
•
Do not push or pull the deep freezer as it may tilt, causing damage to the external
casing and adjustable legs.
•
When the deep freezer is placed in its intended location, remove the pallet. Take
care not to hit the device.
•
Place the device in a flat, secure place that will support its weight.
- 28 -