Cleaning And Maintenance; Safety Advice - Bartscher 700 series Bedienungsanleitung

6. Cleaning and maintenance

6.1 Safety advice

o Before beginning with repair or cleaning works make sure the device has been
disconnected from power socket (pull the power plug!!!) and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and the
plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets. Therefore, you must not
use any kind of pressure water jet for cleaning the device!
6.2 Cleaning
Defrosting
•
Ice that forms inside the device should be defrosted from time to time.
ATTENTION!
Never damage the coolant circulation. Do not use any sharp, pointed or other
mechanical objects to speed up defrosting.
•
For the device completely defrost (at least twice per year), disconnect it from its
power source by removing the plug from its socket and leave the doors open until the
ice completely melts.
•
To gather the water formed by thawing, place the proper containers at the bottom of
the device.
ATTENTION!
Never use electric equipment such as hair dryers, heaters, etc. nor an open flame
to defrost the device.
•
When defrosting, wrap deep-frozen products in several layers of paper (e.g. in
newspapers) and store in a cold place.
•
As the temperature of deep-frozen products will increase, consume them as quickly
as possible as their maximum storage time will be reduced.
- 34 -