Kirami Original Woody Bedienungsanleitung Seite 22

22/68
General
The product is designed for private outdoor use only. Certain items need to be taken into
consideration in the implementation and use of the ThermoWood tub. Wood is a living material, and
it behaves differently in different cases. The biggest factor is humidity. If the humidity percentage
of the air is high, the wood swells and, correspondingly, the wood shrinks. Swelling and shrinking of
ThermoWood compared to untreated wood is only 10%. Therefore, it is suitable for bath tubs.
The tubs have a frame and transport pallet for transport. It needs to be removed before the final
placement of the tub. Do not lift the tub from its brims. The tub should always be lifted from its
bottom. In case the tub has been supplied sideways, it needs to be turned to the correct position as
soon as possible so that the tub does not become oval and the bottom will not come off from the
sides.
INSTALLATION
Making the foundation
Place the tub on an even surface that can carry the tub weight. The foundation can be levelled with
chips (picture below) or if you want a more solid
foundation, it can be cast of concrete. We
recommend placing some boards or planks on
top of the base. It should be installed crosswise
in relation to the direction of the bottom. When
the bottom of the tub is clearly in the air, it airs
well and dries.
Ensure that the tub is not covered by grass or hay,
as it will prevent the wood from breathing and will
cause rotting. The bottom of the tub should always
get some air. In case it remains wet outside, the tub
may leak and it may rot faster than normally.
Note possible maintenance operation when selecting the position for the tub. It must be possible to
move the tub wherever necessary, even if it is embedded in a terrace, for example. The guarantee
will not cover any indirect costs, such as removal or construction of terraces.
Water discharge
The water discharge can be found in the bottom of the tub. Plan the location of
your tub in such a manner that the water discharge does not cause any
problems. The exhaust pipe of the outlet has an inner diameter of 50 mm; it can
be extended with a hose. Emptying valve and pipe connection package are
optional for hoses with 32/38 inner diameters, or alternatively a suitable
discharge sleeve and a suitable screw hose.
INSTRUCTIONS FOR USE: Kirami Original Woody 2 / 9
27.02.2016