Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
Use the supplied AC cord to connect the device to a houshold mains socket.
•
Connect the speakers to the speaker terminals.
•
Optional: Connect external audio equipment to the LINE OUT.
•
Press STANDBY/ON to switch the device on/off.
•
Select the desired mode with the SOURCE button or with the CD/USB button on the RC.
•
Use the Volume+/- buttons to adjust the output volume.
•
Manual tuning: Use the arrow buttons on the RC or on the front panel to tune to the desired frequency.
•
Automatic tuning/scan:
•
Use the FFW/REV buttons to scan the FM band up/down to the next station.
•
Press PLAY/PAUSE on the front panel, or SEARCH on the RC for a full station scan. Up to 40 found
stations will automatically be saved to the available presets and can then be toggled through
with the CH+/- buttons or directly tuned to with the number buttons.
•
Station presets: Use the automatic scan function as described above, or save the current station by
pressing MEMORY. Use the arrow buttons to select the desired memory preset (CH01, CH02, ... CH40)
and press MEMORY again to confirm.
•
Press OPEN on the device top to open the CD tray. Insert an audio or MP3 disc with the printed side
faceing up. Close the CD tray lid. After a short moment, the total track number will be displayed.
•
Insert USB drives into the USB slot.
•
Use
,
,
Please note: MP3 requirements: bit rate: 32 kbps~320kbps, sampling rate: 32khz/44.1khz/48 kHz.
The device can read up to 999 files. USB drives must support USB 1.1 or 2.0 and have a FAT file system.
•
Random / repeat play
Press REPEAT to repeat the current track. Press RANDOM to activate/deactivate the playback of all
contained audio in random order
Initial Use
Operation
and
to operate the music playback.
Radio
CD / USB
17
www.auna.de
Werbung
Inhaltsverzeichnis
