Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
contact. If battery fluid should get into
your eyes seek medical advice addition-
ally. Leaking battery fluid may lead to irrita-
tions of the skin or burns!
Instructions for using the battery
1. When the hedge shears are delivered, the replacea-
ble battery is not charge. Before starting the machine
for the first time, the battery must be charged
2. You must never open the battery.
3. Never throw the used batteries in fire - RISK OF
EXPLOSION!
4. Connect the battery charger only to mains with such
a voltage as stated on the type-bearing plate.
5. Use only the original battery.
6. Never charge the battery with a battery charger
from other producer. This can result in the battery
being damaged or it can result in an injury due to
over-heating.
7. During a long-term operation, the battery may heat
up. Let it cool down before charging it.
8. Do not store the battery charger and the batteries
within children's reach.
9. Do not use the battery charger in an environment with
vapors or inflammable fluids.
10. Charge the batteries only at a temperature within the
range of 10°C to 40°C.
11. Store the battery at temperatures up to 30°C only.
Higher storage temperatures may result in damage
to the battery. The ideal storage temperature range
is 10-15°C.
12. Protect the battery from heat, intense insolation and
fire. Explosion hazard!
13. In case of damage to the battery, hazardous vapours
or fluids may escape. In case of incidental contact
flush with water and seek medical advice immedi-
ately. The fluid may have irritating or caustic effects
on the skin.
14. Never short-circuit the contacts of the batteries and
never interconnect them with metal objects.
15. When transporting the battery, take care that the
contacts are not interconnected, do not use metal
transportation containers.
16. Short-circuit of the battery can lead to explosion. In
any case, the short-circuit connection will damage
the battery.
17. Check the cable regularly on whether it is damaged.
If the cable is damaged, have it replaced.
18. The battery is equipped with a deep-discharge pro-
tection feature: the tool is automatically switched off
if the battery is discharged. Recharge the battery
immediately if this should be the case.
19. Before storing the batteries for the wintertime, charge
them fully once more.
Disposal of accumulators
Please observe the following directions for
the disposal of your accumulator/battery. Bat-
teries are not to be put into the rubbish. As a
consumer you are legally obliged to return used
batteries and accumulators. At the end of the
GB | Operating Instructions
Items supplied
Please check that the article is complete as specified in
the scope of delivery. If parts are missing, please contact
our service center or the sales outlet where you made
your purchase at the latest within 5 working days after
purchasing the product and upon presentation of a valid
bill of purchase.
• Open the packaging and take out the equipment with
• Remove the packaging material and any packaging
• Check to see if all items are supplied.
• Inspect the equipment and accessories for transport
• If possible, please keep the packaging until the end of
• Trimmer
• Guard hood
• Battery
• Charging unit
• Additional handle
• Original operating instructions
Danger!
The equipment and packaging material are not toys. Do
not let children play with plastic bags, foils or small parts.
There is a danger of swallowing or suffocating!
Before putting into operation
Fitting the safety hood (Fig. 3-4)
Push the guard hood (Fig. 1/Item 8) in the direction of the
arrow onto the motor housing as shown in Fig. 3. Make
sure that it latches in place correctly! Make sure that the
guard hood is fitted as in Fig. 4.
Fitting the blade head (Fig. 5 – 6)
Fit the blade head (Item 7) onto the mounting shaft and
fasten it with the screw (Item 14).
Inserting the blade (Fig. 7)
Place the larger opening of the blade (Item 9) in the
blade mount (A) on the blade head (Item 7) and pull
it outwards in the direction of the arrow until the blade
clicks into place as shown in Fig. 7.
Height adjustment (Fig. 8)
Undo the union nut (Item 5) until the grass trimmer han-
dle can be moved in and out freely. Now set the required
working height (Fig. 8) and secure the handle in this po-
sition by tightening the union nut again.
GB-6
duration of your apparatus, the batteries or
accumulators have to be taken from the appa-
ratus, disposing of them separately. You have
the possibility of delivering your old batteries
and accumulators to the local collecting points
of your municipality or to your dealer or to the
distribution centers.
care.
and/or transportation braces (if available).
damage.
the guarantee period.
Werbung
Inhaltsverzeichnis
