Display In "Advanced" Mode - Ravelli HIDRO LINE HR100 Gebrauchs- Und Wartungshandbuch

N.B.: It is recommended to have an e ternal t. with
.
OFF-SET of at least 3 °C if you want to use the COMFORT CLIMATE.
7.2.3 Setting boiler water temperature
Fig.17
Set boiler water
temp. (H O)
2
power.
N.B.: On reaching both settings (room + water), the stove regulates
itself and the writing MODULATED WORKING appears on the display.
7.2.4 Working power setting
Fig.18
Select
Power
mum power.

7.3. Display in "ADVANCED" mode

Fig.15A
Working Modulation
Fig.15B
Working Modulation
"OK" button
chosen.
Button "1"
Button "2"
them.
Fig.21
System Layout
Pag.26
N.B.1: The stove will switch on
each time with the ma imum de-
fault power by overwriting the pre-
vious setting.
N.B.2: When the stove passes
to modulation, it works on mini-
Room temperature
Circulator on
USER MENU
SYSTEM LAYOUT on the version
IDRO_RDS_2.00
(password
FACTORY CALIBRATION
BASIC PARAMETERS
- Stove Status
(for
-
7.3.1 "STOVE STATUS" menu
Fig.21
-
Smoke 120°C
Hauger Status 1
7.3.2 "SET ROOM and BOILER WATER" menu
button twice.
To change the setting, refer to the paragraph 7.2.2.
To change the setting, refer to the paragraph 7.2.3.
7.3.3 "SET POWER" menu
button twice.
To change the setting, refer to paragraph 7.2.4.
Fig.22
Set
dd mm yy Day
TUES
-
-
7.3.5 "CHRONO" menu
pro-
Winter/Summer Language
7.3.4 "CLOCK" menu
-
-
-