Display In "Save Light" Mode; Display In "Base" Mode; Description Of Commands - Ravelli HIDRO LINE HR100 Gebrauchs- Und Wartungshandbuch

6.3.5. Stove hydraulic system with hot water production kit (available
only for models HRV160 and HR200 )
hot water.
Fig.13
M
MI
SP
V
TS
V
RI
ACS
-
7. DESCRIPTION OF THE COMMANDS AND SYMBOLS
OF THE DISPLAY

7.1. Display in "SAVE LIGHT" mode

Fig.14
N.B. The SAVE LIGHT screen automatically displays when the display
backlighting switches off.

7.2. Display in "BASE" mode

Fig.15A
Working Modulation
Fig.15B
Working Modulation
N.B. The HEATING/SANITARY system indicates the position of the three way valve
(only on models with the sanitary kit incorporated in the stove mod. HRV160 - HR200)
N.B.2: The symbol of the cleaner is active only on the stove models with an automa-
tic cleaner system.
Button "1"
Button "2"
"OK" button
RP
AL
necessary calculations before install-
CI
RA RA
V1 V1 V1
V2 V2
Rapid display mode of room and hot
water temperatures.
Button "1" button to display and
Button "2" button to display and
"OK" button
water set
Room temperature
7.2.1 Switching stove on and off
1. Insert the power supply cable.
2.
3.
4.
.
RA
6.
SWITCH ON
WAITING FLAME
V2
FLAME PRESENT
WORK
7.2.2 Room temperature setting
-
Fig.16A
Set Room
Temp.
Console Probe
ROOM PROBE SUPPLIED MODE (DEFAULT USE RECOMMENDED)
Console Probe.
ROOM PROBE INTEGRATED ON DISPLAY MODE
Circulator on
EXTERNAL THERMOSTAT MODE (for hydro models HR100 - HR200)
Fig.16C
Set boiler water
temp. (H O)
2
8.6.
Fig.16B
Set Room
Temp.
Console Probe
Console probe bo ( ag), if
console probe
EXTERNAL THERMOSTAT MODE
(for hydro models HRV120 - HRV170
- HRV160)
which is correctly connected to the
-
-
-
Pag.25