Operation; Error Messages; Maintenance; Troubleshooting - Pentair SIATA V132 SFE-EV VIRIDION Bedienungsanleitung

Day of week
A
Adjust the current day of the week using
B
Press to validate and switch to the next parameter.
Regeneration start time
A
Adjust the current time using
B
Press to validate and switch to the next parameter.
Number of people
A
Adjust the number of people using
B
Press to validate and switch to the next parameter.
A Note: The next parameters are only indicative and can not be changed. 
By pressing
days remaining to next regeneration, regeneration mode programmed, display until
type and opening time of brine valve.
4.1. History
To access the recorded information, press and hold
5 .

Operation

5.1. Recommendations
• Use only regenerate salts designed for water softening EN973;
• For optimal system operation, the use of clean salt free from impurities is recommended (for example salt pellets);
• Do not use ice melt, block, or rock salts;
• The sanitizing process (both with liquid and electrochlorination) introduces chlorine elements which may reduce the
lifetime of the ion exchange resins. Refer to the technical guides for resins in common use, providing necessary checks on
the system.
5.2. Manual regeneration
Immediate regeneration
A
Press and hold for 5 seconds.
→
Regeneration icon displayed.
→
Camshaft starts rotating to cycle C1.
6 .

Error messages

SALT
If the message appears, refill the brine tank with salt. For any other messages, call your local dealer.
7 .

Maintenance

A
Mandatory:
Cleaning and maintenance shall take place at regular intervals in order to guarantee the proper
functioning of the complete system, and be documented in the Maintenance record book.
8 .

Troubleshooting

Please follow this procedure for any technical support:
A
Collect the required information for a technical assistance request.
→
Product identification (see 2.1. Location of safety labels, page 5 and Original settings, page 2);
→
Error number displayed on the controller;
B
Contact your local dealer who installed this device (see contact details on last page).
→
Also call him if the water tastes salty, if the water is not softened or if there is no salt consumption.
Ref. MKT-UG-009 / A - 21.12.2016
and
to modify the digit and
and .
the display switch to the next parameter following this sequence:
.
to pass to the next digit.
for 5 seconds.
User Guide Siata V132-SFE-EV
7 / 28