Product Warranty - FILL-RITE 300V series Gebrauchsaneisung Und Sicherheitsvorschriften

The pumps are shipped with a threaded vacuum breaker installed.
Fill-Rite recommends that the vacuum breaker be tubed back to
the tank. The vacuum breaker is used to break a siphon should an
open nozzle or a leaking hose be below the fluid level in the tank
with the pump turned off.
The following illustration shows methods of installing tubing for the
vacuum breaker that terminates in the vapor space at the top of the
tank. The tubing must terminate in the vapor space; if the tubing
terminates below the liquid level of the tank, the vacuum breaker
will not prevent siphoning. It is also very important that there are
no liquid traps in the tubing. The tubing must have a continuous
slope from the pump down to the tank. If the pump is installed
below the top of the tank, the tubing may slope both ways from a
single high point above the tank. Alternately, tubing can be piped
to any available opening on top of tank it the tank adapter is not
used. Use reducer bushings as required.
Tuthill Transfer Systems ("Manufacturer") warrants to each
consumer buyer of its Fill-Rite products (the "Buyer"), from the date
of invoice or sales receipt, that goods of its manufacture ("Goods")
will be free from defects of material and workmanship. Duration of
this warranty is as follows:
• Heavy Duty Products - Two years
• Standard Duty Products – One year
• Economy Duty Products – One year
• Cabinet pumps, Parts, and Accessories - One year
Manufacturer's sole obligation under the foregoing warranties will
be limited to either, at Manufacturers' option, replacing or repairing
defective Goods (subject to limitations hereinafter provided) or
refunding the purchase price for such Goods theretofore paid by
the Buyer, and Buyer's exclusive remedy for breach of any such
warranties will be enforcement of such obligations of Manufacturer.
If Manufacturer so requests the return of the Goods, the Goods will
be redelivered to Manufacturer in accordance with Manufacturer's
instructions F.O.B. Factory. The remedies contained herein shall
www.tuthill.com
VACUUM BREAKER
VACUUM BREAKER TUBING INSTALLATION
ANTI-SIPHON LINE
(NOT INCLUDED)

PRODUCT WARRANTY

8825 Aviation Drive
Fort Wayne, Indiana USA 46809
Tel 260 747-7524 Fax 260 747-3159
Fill-Rite recommends using the vacuum breaker tank adapter with a 1/4
npt opening in the side of the hex portion that terminates in the vapor
space of the tank. Install tank adapter per instructions found in this
manual. Make liquid tight connection from the adapter to the vacuum
breaker using a minimum of 1/4 metal tubing compatible with the liquid
being pumped. If a vacuum breaker tank adapter is used and the 1/4 npt
opening is not used for the tubing, plug the opening liquid tight.
constitute the sole recourse of the Buyer against Manufacturer for
breach of warranty. IN NO EVENT SHALL MANUFACTURER'S
LIABILITY ON ANY CLAIM FOR DAMAGES ARISING OUT OF THE
MANUFACTURE, SALE, DELIVERY, OR USE OF THE GOODS
EXCEED THE PURCHASE PRICE OF THE GOODS. The foregoing
warranties will not extend to Goods subjected to misuse, neglect,
accident or improper installation or maintenance, or which have
been altered or repaired by anyone other than Manufacturer or its
authorized representative. THE FOREGOING
EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OF
MERCHANTABILITY, FITNESS FOR PURPOSE OF ANY OTHER
TYPE, WHETHER EXPRESS OR IMPLIED. No person may vary the
foregoing warranties and remedies except in writing signed by a
duly authorized officer of Manufacturer. Warranties or remedies
that differ from the foregoing shall not otherwise be binding on
Manufacturer. The Buyer's acceptance of delivery of the Goods
constitutes acceptance of the foregoing warranties and remedies,
and all conditions and limitations thereof.
5
PUMP
ADAPTER
SKID TANK
WARRANTIES ARE