Gewa DP340G Schnellstartanleitung Seite 40

ASSEMBLY INSTRUCTIONS
UP360G
3
NOTE
40
ASSEMBLY INSTRUCTIONS
In this section we will show you how to easily set up your GEWA digital piano.
For the assembly you need:
• size 2 Phillips screwdriver
• second assisting person
Do not firmly tighten the recessed head screws until all parts of your digital piano are
aligned. Make sure you assemble your digital piano on level ground.
Now lets start assembling your GEWA digital piano:
1. Unfold the pedal cable (not shown) and screw the adjustment screw ( 11 ) into the
pedal board ( 3 ).
2. By using the phillips screws ( 7b ), connect the side panels ( 4 and 5 ) to the pedal
board.
3. Then attach the rear panel (2) with phillips wood screws (8).
4. Now place the keyboard onto the base from above. Make sure that the angels of the
side panels are guided into the millings of the keyboard. Then secure the keyboard with
4 screws ( 7a ).
5. Now screw the headphone hanger (9) onto the left underside of the keyboard by using
a phillips screw ( 7a ).
6. Then align your digital piano and tighten all of the screws.
7. Place your digital piano at the desired location and make sure that the adjustment
screw ( 11 ) touches the floor as shown below.
UP360G