Focusing; The Live View Page - Axis 207 series Installationsanleitung

Focusing

Focus Ring
(inner ring)
Status Indicator
(outer ring)
Note:
Upon delivery, the raised line on the focus ring is aligned with the dot above the lens, and the focus is
set to infinity.

The Live View Page

Depending on whether or not the Live View page has been customized, the buttons
described below may or may not be visible.
The Video Format drop-down list allows the video format on the Live
View page to be temporarily changed.
The Output buttons control the
output directly from the Live
View page. These buttons are
configured under Setup > Live
View Config > Layout.
The Trigger buttons can trigger an event directly from the Live View page.
These are configured under Setup > Live View Config > Layout.
Small dot above the lens
assembly.
Raised line
on focus ring.
Pulse - click this button to activate the
output for a defined period of time, e.g.
to switch on a light for 20 seconds.
Active/Inactive - click these buttons to
manually start and stop a connected
device, e.g. switch a light on/off.
AXIS 207 - Accessing the Camera
To focus:
Open a browser and
examine the image. If
required, adjust the focus
ring until the focus is
satisfactory.
11