Specification - Whale Orca Auto 1300 Montagehandbuch Und Bedienungsanleitung

1. INSTALLATION & USER INSTRUCTIONS
Thank you for purchasing this Whale® product. For over 40 years, Whale® has led the
way in the design and manufacture of freshwater and waste systems including:
pumps, plumbing, faucets and showers for low voltage applications. The company
and its products have built a reputation for quality, reliability and innovation backed up
by excellent customer service. For information on our full range of products visit
www.whalepumps.com

2. SPECIFICATION

Product Code
Flow Capacity @ 13.6 V d.c.
Flow Capacity @ 1m head
Voltage
Current Draw
Recommended Automotive Fuse Size
Outlet Diameter
Materials
3. PRINCIPALS OF OPERATION
IC - Intelligent Control Technology
At the heart of every Whale® IC product lies innovative electronic control circuitry built
in. This sensor technology is built into Orca Auto 1300 and means no separate bilge
switch is required.
Orca Auto 1300
The Orca Auto 1300 is an automatic submersible bilge pump for use in marine
vessels. Output capacity depends on installation and operating conditions.
4. TO THE USER
Read the following instructions carefully.
5. TO THE FITTER
Check that the product is suitable for the intended application, follow these installation
instructions and ensure all relevant personnel read the points listed below. Also ensure
that these operating instructions are passed on to the end user.
6. APPLICATION
Orca Auto 1300 is designed for installation in recreational marine vessels only and
operated on 12V d.c. (BE1482) or 24 V d.c. (BE1484) electrical supply only. If it is
intended for use for any other purpose or with any other liquid, it is the user's respon-
sibility to ensure that the pump is suitable for the intended use and, in particular, that
the materials are fully compatible with the liquids to be used. The Orca Auto 1300 is
not recommended for domestic applications.
The Orca Auto is recommended to have a Duty Cycle of 60%
INSTALLATION AND OPERATION MANUAL
Whale® Orca Auto 1300
BE1482(B)
1300 US GPH (82 ltrs/min)
1078 US GPH (68 ltrs/min)
12 V d.c.
5 Amp
7 Amp
1" (25mm) / 1 1/8" (28mm)
Pump body: ABS, Seals: Nitrile, Impeller: Acetal
ENG
BE1484(B)
24 V d.c.
2.5 Amp
5 Amp