Installation - aldes C.AXPIR Installations- Und Wartungsanleitung

2. INSTALLATION

2.1. Unit wall fi xing
The equipment must be installed in a ventilated location that is easy to access, far from any heat source and near a power socket.
It should be fi xed to the wall using the bracket supplied on a wall capable of supporting the weight of the machine. The unit should be fi xed at least
60 cm above the fl oor so that the dust tank can be emptied. It is important to leave enough space either side of the unit to facilitate its fi tting and
maintenance.
Recommended: 6 screws M6x30 mm (not
supplied). Abide by the drilling template.
15
EN