Safety; Target Readers; Work Safety Information; Power Connection - Siemens SISTORE CX4 series Inbetriebnahmeanleitung

Safety

1 Safety
1.1

Target readers

1.2

Work safety information

1.2.1

Transport

4
Siemens Building Technologies
Fire Safety & Security Products
The instructions in this document are designed for the following target readers:
Target readers Qualification
Operational startup Technical training for
personnel building or electrical
installations.
Read the general safety precautions before operating the device.
Keep this document for reference.
Always pass this document on together with the product.
Any national or local safety standards or laws that apply to the development,
design, installation, operation or disposal of a product must be adhered to in
addition to the instructions in the product documentation.
Radio interference with other devices in the environment
This is a Class A device. This equipment may cause radio interference in a
residential installation. In this case the user is encouraged to perform
appropriate measures to correct the interference.
Liability claim
Do not connect the device if it is damaged or any parts are missing.
Do not make any changes or modifications to the device unless they are
expressly mentioned in this manual and have been approved by the
manufacturer.
Use only spare parts and accessories that have been approved by the
manufacturer.

Power connection

Use only the plug-in power supply unit that is included in the delivery.
Use the plug-in power supply only in conjunction with a power supply cable that
has been approved in your country and complies with the national standards.
Connect the plug-in power supply only to power sources with the specified
voltage. Voltage supply requirements can be found on the type label (see
Section 3: Technical data).
Damage during transport
Keep the packaging material for future transportation.
Do not expose the device to mechanical vibrations or shocks.
Activity Condition of the
product
Puts the product into The product is not yet
operation for the first installed and
time. configured.
03.2009