Herunterladen Inhalt Inhalt Diese Seite drucken

Installation; Setup; Meaning Of The Written Warning Notices; Meaning Of The Hazard Symbols - Siemens SISTORE CX4 series Inbetriebnahmeanleitung

Intelligent digital video codec
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
1.2.2

Installation

1.2.3

Setup

1.3

Meaning of the written warning notices

1.4

Meaning of the hazard symbols

Siemens Building Technologies
Fire Safety & Security Products
Cable damage due to mechanical load
Do not apply tensile force on the cable.
Make sure that cables are not under stress, kinked or damaged.
Damage due to unsuitable mounting location
The environmental conditions recommended by the manufacturer must be
observed (see Section 3: Technical data).
Do not operate the device close to sources of powerful electromagnetic
radiation.
Do not operate the device in dusty places.
The device should only be used for indoor applications.
Do not expose the device to mechanical vibrations or shocks.
Protect the device against moisture.
Damage to the device due to lack of ventilation
Do not block or cover the ventilation openings of the device.
The severity of a hazard is indicated by the following written warning notices.
Signal word
Type of risk
CAUTION
There is a risk of minor injuries or damage to property.
IMPORTANT
Malfunctioning may result
The nature of the hazard is indicated by icons.
Caution - Dangerous area!
Caution: Dangerous electrical voltage!
Safety
5
03.2009

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis