geo-FENNEL Geo6X SP Bedienungsanleitung Seite 19

EN
E
USE WITH RECEIVER
To prolong the working range or at unfavourable light conditions the Geo6X SP / Geo6X SP KIT / Geo6X
SP GREEN KIT can be used with the optional receiver (not included in this kit).
Switch on the desired laser lines and press the button ON/OFF RECEIVING MODE at laser (the LED
for the corresponding lines flashes).The selected laser lines can now be deteced by the receiver (the
visibility of the laser lines is weaker in this mode).
Press this button again to quit this mode.
MANUAL FUNCTION
The MANUAL function is only available in the OFF mode (as otherwise compensator alarm would start).
Press the button ON/OFF RECEIVING MODE / ON/OFF MANUAL FUNCTION to start the MANUAL
function. The ON/OFF LED lights, the MANUAL LED blinks. Now the laser can be used in slope positi-
on; the compensator alarm is off. All laser lines can be projected as shown on the left page.
Press the button ON/OFF RECEIVING MODE / ON/OFF MANUAL FUNCTION again to quit the
MANUAL function.
APPLICATION DEMONSTRATION
19