Maintenance And Cleaning; Troubleshooting - HEATSTRIP TGH34PL Betriebsanweisungen

MAINTENANCE AND CLEANING

• To enjoy years of outstanding performance from
your appliance, regular services of the appliance is
mandatory as followings:
• The appliance should be inspected before at least
one time a year by a Qualified Service only. More
frequent cleaning may be required according to the
use of the appliance.
• Any guard or other protective device removed for
servicing the appliance must be replaced before
operating it.
• Keep exterior surfaces clean, free and clear from
combustible materials.
• Use warm soapy water for cleaning. Never use
flammable or corrosive cleaning agents.
• While washing your unit makes sure to keep the area
around the burner assembly dry at all times. If the
gas control is exposed to water in any way, DO NOT
tries to use it. It must be replaced.
• Burner and LPG compartment circulating air
passageways of the appliance must be kept clean.
• Airflow must be unobstructed. Keep controls, burner
and circulation air passageways clean. Signs of
possible blockage include:
• Gas odor with extreme yellow tipping of flame /
Appliance glow is excessively uneven / Appliance
makes popping noises.

TROUBLESHOOTING

Fault
Pilot or main burner will not light
Main burner will not light fully
Flame is yellow
If you can not solve trouble according to one of the mentioned solution, heatstrip@heatstrip.eu or contact your dealer or
Distributor Responsible.
ENGLISH
• Spiders and insects can nest in burner or orifices.
This dangerous condition can damage the appliance
and render it unsafe for use. Clean burner holes by
using a heavy duty pipe cleaner. Compressed air
may help clear away smaller particles.
• Carbon deposits may create a fire hazard. If any
carbon deposits develop, clean dome and engine
with warm soapy water.
• For proper cleaning, a vacuum cleaner can be used.
Note: In a salt-air environment (such as near the
sea), corrosion occurs more quickly than normal.
Frequently check the corroded areas and repair
them promptly. Stubborn stains, discoloration and
possibly rust pitting can occur from exposure to
harsh outdoor conditions. Be careful not let any
powder or solvent come in contact with painted or
plastic components as damage may occur.
After long use, some discoloration can come up
and it screen is normal.
• Please contact the Manufacturer or dealer for
information regarding replacement hoses,
thermocouples, igniters, lava rocks, etc.
Attention: Never use unauthorized parts or
component for this appliance.
Use only original equipment replacement spare
parts and components.
Otherwise may void the warranty of this product
and result in a hazardous condition.
Causes
(a) Air in gas line
(b) Blockage in gas line
(c) Igniter not sparking
(d) Cylinder turned off
(e) Cylinder empty
(a) Poor gas supply
(b) Gas control inoperative
(c) Insufficient gas
(a) Check injector
(b) Check gas pressure
(c) Check venturi for dust
(d) Check burner ports for blockage
•
•
•
•
•
•
•
•
•
•
Purge gas line
Trace back and clear
Repair lead, electrode, piezo or replace battery
Turn on
Install full cylinder
Trace supply back to source, clear where necessary
Inspect valve, rectify
Install full cylinder/rectify gas supply
Clean if necessary
Adjust as required
Clean if necessary
Clean if necessary
9
STORAGE (after use)
Turn control knob in "OFF" position (full disk).
Disconnect LPG cylinder.
Store the appliance in a cool dry place away from
direct sunlight; store it upright in an area sheltered
from direct contact with inclement weather (such as
rain, sleet, hail, snow, dust and debris).
If desired, cover to protect exterior surfaces and to
prevent build up in air passages.
Note: Wait until appliance is cool before covering.
During periods of extended inactivity or when transporting:
Turn control knob in "OFF" position (full disk).
Disconnect LPG cylinder and move to a secure,
well ventilated location outdoors. DO NOT store in a
location that will exceed 50 °C.
Store appliance upright in an area sheltered from
direct contact with inclement weather (such as rain,
sleet, hail, snow, dust and debris).
If desired, cover appliance to protect exterior
surfaces and to prevent build up in air passages.
Note: Wait until appliance is cool before covering.
Remedy