g
Disposing of the packaging
The packaging protects the device from transport damage . The pack-
aging materials have been selected according to environmental and
waste disposal aspects and can therefore be recycled .
Recycling the packaging material for further use saves raw materials
and reduces waste . When no longer required, dispose of the packag-
ing materials in accordance with the local regulations .
NOTE
►
If possible, keep the original packaging throughout the warranty
period so that the device can be duly packed in case of a war-
ranty claim .
Requirements for the place of use
For safe and trouble-free operation of the device, the installation
location must satisfy the following requirements:
■
The device must be set up on a solid, flat and horizontal surface.
■
The device is designed for operation within an ambient tempera-
ture range of +5°C to +35°C .
■
Do not use the device in a hot, wet or very humid environment .
■
Do not expose the device to direct sunlight .
■
Do not install the device in the vicinity of magnetic fields.
■
Make sure that there is sufficient space for ventilation.
■
The mains socket must be easily accessible and enable fast
disconnection in the event of an emergency .
■
A WLAN connection must be in the vicinity (WLAN router) in order
to use the Internet radio .
50
Setting up and connection
IR200