Store Tv Channels; Automatic Installation; Manual Installation; Give Name - Philips 28PW9520 Bedienungsanleitung

Store TV channels

After language and country are set correctly, you can now search for and store the TV channels in two
different ways: using Automatic Installation or Manual Installation (tuning-in channel by channel).
Select your choice with the cursor right.

Automatic installation

Automatic install
Install
Install
&
Select
Automatic install
Note: All channels must be unlocked in order to
autoprogram. If requested, enter your code to unlock
all channels. (See TV, Features menu, Childlock,
p. 11.)
é
Press the cursor down.The autoprogramming
option label appears.
Start
"
Press the cursor right.

Manual installation

Manual install
Install
Selection mode
System
Programme
Search
Fine tune
Store

Give name

Give name
Install
VCR1
p
BBC1
BBC2
CNN
TVE
.....
It is possible to change the name stored in the
memory or to assign a name to a TV channel for
which a name has not yet been entered. A name
with up to 5 letters or numbers can be given to
the programme numbers 0 to 99.
&
Select in the Install menu and
Give Name
press the cursor down.
6
Start
in the Install menu.
Searching for and storing TV channels is done channel by channel.
You must go through every step of the Manual Installation menu.
&
Select Manual install
é Press the cursor down.
Follow the instructions on screen.
Note: Search or direct selection of a TV channel.
If you know the frequency, the C- or S-channel number, enter the 3 or
2 digits of the frequency or the channel number directly with the digit
keys 0 to 9 (e.g. 048). Press the cursor down to proceed.
Repeat to search for another TV channel.
® ®
Space Delete
π
ABCDEFG 123
HIJKLMN 456
OPQRSTU 789
VWXYZ 0
® ®
Shift Special
' The message
Searching
progress of autoprogramming is displayed.
If a cable system or a TV channel which
broadcasts ACI (Automatic Channel
Installation) is detected, a programme list
appears.Without ACI broadcast, the channels
are numbered according your language and
country selection.You can use Reshuffle to
renumber them. See p. 7.
It is possible that the cable company or the TV
channel displays a broadcast selection menu.
Layout and items are defined by the cable
company or the TV channel. Make your choice with
the cursor and press the
in the Install menu.
é Select the programme number.
Note: keep the cursor up/down pressed to scroll
through the programme list quickly.
" Press the cursor right.
A keyboard appears on the screen.
Press the cursor right to enter the keyboard.
Press the cursor up/down, left/right to select
the first character and press
every character you want to enter.
Select to enter a space;
Space
the highlighted character in the name entered;
to display upper- or lowercase characters
Shift
on the keyboard;
Special
characters on the keyboard. Press
confirm.
' Press the cursor left repeatedly when you have
finished the name giving.
(
Select another programme number and repeat
" '
steps to .
appears and the
key.
OK
. Repeat for
OK
to erase
Delete
to display special
to
OK