Connecting the power supply
■
Before connecting the device, compare the connection data (voltage and frequency)
on the rating plate with that of your mains power supply. This data must agree so
that the device is not damaged.
■
Insert the plug into a mains power socket.
Handling and operation
This section provides you with important information on handling and using the
device.
Switch the device on/off | Selecting operating mode
♦
Set the main switch
♦
Use the operating mode selector switch
▯
FM: Radio mode (FM)
▯
▯
AUX: Audio playback from a device connected to the 3.5 mm jack (AUX IN)
♦
Set the operating mode selector switch
off.
♦
To switch the device off completely, move the main switch
position.
Adjusting the volume
♦
Turn the volume control
♦
Turn the volume control
Radio mode
NOTE
►
The technical features of this device enable an adjustable reception capa-
bility that exceeds the permitted FM frequency range of 87.5–108 MHz.
In some countries, different national regulations may apply to the assigned
radio frequency ranges. Please note that information received outside of
the assigned radio frequency ranges may not be exploited, passed on to
third parties or otherwise misused.
♦
Pull out the telescopic aerial
♦
Move the operating mode selector switch
scale
♦
Set the desired volume.
♦
Use the TUNING dial
The current frequency (MHz) can be read from the frequency scale
SRBN 5 A1
to the position ON.
: Bluetooth
-mode
®
clockwise to increase the volume.
anticlockwise to decrease the volume.
lights up orange.
to select the desired radio station.
to select the desired operating mode.
to the
position to switch the device
and align it.
into the FM position. The frequency
into the OFF
.
│
7
GB
■