Dell Precision 350 Installierung Und Schnellreferenzhandbuch Seite 29

Light Pattern
GYYG
GYGY
GYGG
GGYY
GGGY
Problem Description
Possible system board
failure.
Memory modules are
detected, but a memory
configuration or
compatibility error exists.
Possible system board
resource and/or hardware
failure.
Possible expansion card
failure.
Other failures has
occurred.
Suggested Resolution
Perform the procedures in "System Board Problems" in
your User's Guide.
If the problem persists, contact Dell.
Ensure that there are no special memory
module/memory connector placement requirements (see
"Memory" in your User's Guide).
Verify that the memory modules that you are installing
are compatible with your computer (see "Memory" in
your User's Guide).
Reinstall the memory modules and then restart the
computer.
If the problem persists, contact Dell.
Perform the procedure in "System Board Problems" and
see "Resolving Software and Hardware Incompatibilities"
in your User's Guide.
If the problem persists, contact Dell.
1
Determine if a conflict exists by removing a card (not
the video card) and then restarting the computer.
2
If the problem persists, reinstall the card that you
removed, remove a different card, and then restart the
computer.
3
Repeat this process for each card. If the computer
starts normally, troubleshoot the last card removed
from the computer for resource conflicts (see
"Resolving Software and Hardware Incompatibilities"
in your User's Guide).
4 If the problem persists, contact Dell.
Ensure that the cables are properly connected from the
hard drive, CD drive, and DVD drive to the system
board.
If the problem persists, contact Dell.
Setup and Quick Re ference Guide
29