Riester RBP-100 Bedienungsanleitung Seite 59

Recommended separation distances between
portable and mobile RF communications equipment and the No touch Infrared Body Thermometer.
The RBP-­100 Blood Pressure Monitor and the RBP-­100 USB Blood Pressure Monitor is intended for use in
an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user
of the RBP-­100 Blood Pressure Monitor and the RBP-­100 USB Blood Pressure Monitor can help prevent
electromagnetic interference by maintaining a minimum distance between portable and mobile RF
communications equipment (transmitters) and the RBP-­100 Blood Pressure Monitor and the RBP-­100 USB
Blood Pressure Monitor as recommended below, according to the maximum output power of the
communications equipment.
Rated maximum
output power of
150 KHz to 80 MHz
transmitter
(W)
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance
d inmetres (m) can be estimated using the equation applicable to the frequency of the transmitter, where P
is themaximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption andreflection from structures, objects and people.
Separation distance according to frequency of transmitter
(m)
80 MHz to 800 MHz
0.12 0.12
0.38 0.38
1.2 1.2
3.8 3.8
12 12
800 MHz to 2.7 GHz
0.23
0.73
2.3
7.3
23
Seite 22 von 23
RBP-100