Installation; Mounting Location - Siemens Sitrans LR460 Kurzanleitung

Power
Power Supply
±
• 100 to 230 V AC,
• 24 V DC, +25/-20%, 6 W
• Fuse (AC)
• Fuse (DC)
Approvals
• Hazardous areas
• General
• Radio

Installation

WARNINGS:
• SITRANS LR 460 is to be used only in the manner outlined in this manual, otherwise
protection provided by the equipment may be impaired.
• Installation shall only be performed by qualified personnel and in accordance with
local governing regulations.
Notes:
• For European Union and member countries, installation must be according to ETSI EN
302372.
• Refer to device nameplate for approval information.
• Use appropriate conduit and conduit fittings or cable glands, to maintain IP or NEMA
rating.
• Observe maximum permissible ambient and process temperatures. See
Operating Temperature
• For US and Canadian installations, see

Mounting location

Notes:
• Provide easy access for viewing the display and programming via the handheld
programmer.
• Provide an environment suitable to the housing rating and materials of construction.
• Provide a sun shield if the device is mounted in direct sunlight.
7ML19985QW81
15%, 50/60 Hz, 6 W
SI1Fast acting ceramic, 4 x 20 mm, 1 A, 250 V AC
SI2Slow-Blow, 4 x 20 mm, 0.63 A, 250 V AC
SI1Fast acting ceramic, 4 x 20 mm, 2 A, 250 V AC
SI2Slow-Blow, 4 x 20 mm, 0.63 A, 250 V AC
FM/CSA: Class II, Div. 1, Groups E, F, and G, Class III
ATEX II 1 D, 1/2 D, 2D T85 deg C
CSA , FM, CE
US/C
FCC, Industry Canada, European Radio (R&TTE)
on page 2.
FCC and IC Conformity
SITRANS LR 460 – QUICK START MANUAL
Ambient/
on page 2.
Page EN-3