Axis 212 PTZ Installationsanleitung Seite 8

Page 8
AXIS IP Utility
AXIS IP Utility automatically discovers and displays Axis devices on your network. The
application can also be used to manually set a static IP address. AXIS IP Utility is available on
the Axis Network Video Product CD, or it can be downloaded from www.axis.com/techsup
Note that you must install the AXIS 212 PTZ on the same network segment (physical subnet)
as the computer running AXIS IP Utility.
Automatic discovery
1. Check that the AXIS 212 PTZ is con-
nected to the network and that power
has been applied.
2. Start AXIS IP Utility.
When the AXIS 212 PTZ appears in the
window, double-click it to open the
camera's home page.
3. See page 13 for instructions on how to
set the password.
Set the IP address manually
1. Acquire an unused IP address on the
same network segment your computer
is connected to.
2. Click the button
using serial number and enter the serial number and IP address for the AXIS 212 PTZ. The
serial number is located on the product label.
3. Click the Set IP button and follow the instructions.
4. Click View Home Page to access the AXIS 212 PTZ web pages.
5. See page 13 for instructions on how to set the password.
Set IP address
AXIS 212 PTZ Installation Guide
Notes:
Set the IP address using IP Utility within 2 minutes of starting
the camera.
AXIS IP Utility can be used to change a dynamically set
IP address to a static one.
Single camera / small installations