Axis 212 PTZ Installationsanleitung Seite 10

Page 10
Other available methods
This table shows alternative methods for setting or discovering the IP address.
Installation methods
UPnP™
See page 10
Bonjour
See page 11
AXIS Dynamic DNS Service
See page 11
ARP/Ping
See page 12
View DHCP server
admin pages for IP address
(See note below)
Notes:
• UPnP™, DHCP and Bonjour are enabled by default in the AXIS 212 PTZ.
• The AXIS 212 PTZ has the default IP address 192.168.0.90
• To view the admin pages for the DHCP server, please see the server's own documentation. You may need to
contact your network administrator.
• If setting the IP address fails, check that there is no firewall blocking the operation.
• AXIS Dynamic DNS Service requires an Internet connection without an HTTP proxy.
• Bonjour - applicable only in browsers with support for Bonjour, e.g. Safari.
UPnP™
UPnP ™
functionality is enabled by default in the AXIS 212 PTZ. If also enabled on your
computer (Windows ME or XP), the camera will automatically be detected and a new icon will
be added to "My Network Places." Click this icon to access the AXIS 212 PTZ. See also page 13
for instructions on how to set the password.
Note that you must install the AXIS 212 PTZ on the same network segment (physical subnet)
as the computer handling the installation.
Note:
To install the UPnP™ service on your computer, open the Control Panel from the Start Menu and select Add/Remove Pro-
grams. Select Add/Remove Windows Components and open the Networking Services section. Click Details and then
select UPnP as the service to add.
DHCP Server
Requirements
in network
Optional
Optional
Required
UPnP™ is a certification mark of the UPnP
AXIS 212 PTZ Installation Guide
Operating system
Windows (ME or XP)
Mac OSX (10.4 or later)
All
All
All
™
Implementers Corporation.
Recommended
method for:
Macintosh