Function Outputs And Alarms - Emerson A6312 Schnellstartanleitung

Product Information / Produktinformation A6312
Rotational Speed Monitor

1.6.3 Function outputs and alarms

Two function outputs per channel with separate configuration for functions and alarm limits.
Function and switching characteristics are configured separately.
Limit settings
During configuration freely selectable depending on the relevant function. With functions
rotational direction and standstill no alarm limits.
Adjustment range
Resolution
Hysteresis
Reaction time
Delay time between calculation of characteristical value and reaction of the limit output (only
valid for output function limit).
average reaction time
Alarm blocking
Blocking
No blocking
* During configuration it can be defined whether or not blocking of the alarm outputs shall be
controlled by the channel supervision.
Alarm visualization
By means of two yellow LEDs for channel 1 and channel 2.
No limit exceeded or alarms blocked LED off
Limit eceeded or function „true"
0 ... 100 % of the configured measuring range
≤0,1 % of full scale.,
1 rpm in speed range 0...12000 rpm
freely selectable
2 ms
if (supply or watchdog not ok)
(Ex. locking = lock)
(channel status = not ok*)
if condition above are not met
LED switched on (steady light)
Page 15
ODER
ODER