Service Information - Philips HQT562 Bedienungsanleitung

C
1
2
C
3 Pull the battery holder approximately
4 cm. out of the appliance.
4 Insert the screwdriver into the small slot
in the printed circuit board marked with
an arrow. Push the screwdriver down until
parts of the printed circuit board break
off.
5 Grasp the blue wire and pull the battery
out of the appliance.
Do not connect the appliance to the mains again
after it has been opened!
Service & information
If you need information or if you have a problem,
please visit the Philips Web site at
www.philips.com or contact the Philips Customer
Care Centre in your country (you will find its
phone number in the worldwide guarantee
leaflet). If there is no Customer Care Centre in
your country, turn to your local Philips dealer or
contact the Service Department of Philips
Domestic Appliances and Personal Care BV.
ENGLISH
9