Fastfreeze Function; Daily Use - REX RFC3110NVD Benutzerinformation

Press MODE (several times if necessary)
until the corresponding icon appears
The FastCool function shuts off
automatically after approximately 6 hours.
During the FastCool function also the fan
inside the refrigerator compartment is
automatically activated.
The fan inside the refrigerator
compartment is automatically
activated also when the room
temperature is high (over 32°C)
or for a quick temperature
recovering after door opening,
even though the FastCool
function is not activated.
It is possible to de-activate the
function at any time by
pressing MODE (refer to
"Functions Menu").
Fan function
The function is activated by pressing the
MODE (several times if necessary) until
the corresponding icon appears .
In this condition the fan works
continuously.
It is possible to deactivate the function at
any time by pressing the MODE until the
icon goes out of view.
If the function is activated automatically
the Fan icon is not shown (refer to "Daily
use").
The activation of the Fan function
increases the energy consumption.

FastFreeze function

To freeze fresh food, you will need to
activate the FastFreeze function.

DAILY USE

WARNING! Refer to Safety
chapters.
Press MODE (several times if necessary)
until the corresponding icon appears.
.
This function stops automatically after 52
hours.
It is possible to deactivate the function at
any time by pressing MODE (refer to
"Functions menu").
High temperature alarm
An increase in the temperature in the
freezer compartment (for example due to
a power failure) is indicated by:
• flashing temperature
• freezer compartment flashing (Freezer
compartment indicator / Door open
alarm indicator)
• sounding of buzzer
• red illumination of display
When normal conditions are restored:
• the acoustic signal shuts off
• the temperature value continues to
flash
• the display illumination remains red.
When you press MODE / Alarm reset
switch to deactivate the alarm, the highest
temperature reached in the compartment
appears on indicator
At this point the flashing stops and the
display illumination changes over from red
to white.
During the alarm, the buzzer can be
switched off by pressing MODE / Alarm
reset switch.
The illumination of the display remains red
until normal storage conditions are
restored.
Cleaning the interior
Before using the appliance for the first
time, the interior and all internal
accessories should be washed with
lukewarm water and some neutral soap to
7
for few seconds.