BabySafe Westie Instruction Seite 18

Step 2.2 Locking the seat to the Isofix base in
FORWARD POSITION: 9 to 18kg
a) Lifting the seat, lock the mental tube in the underneath of the front side of the to
lock into the REAR-LOCK on Isofix base.
b) Pull the LOCKING-HANDLE forward, and push the back edge of the seat down-
wards, and lock the mental tube in the underneath of the rear side of the seat to lock
into FRONT-LOCK on Isofix base.
c) Release the LOCKING-HANDLE, and lock the mental tube in the rear side, make
sure you see the Safety display shows GREEN on the top front side of Isofix base.
pull
CAUTION!
• Make sure that the seat is correctly anchored to both anchoring points and the
safety display shows GREEN.
• If the child's body weight exceeds 9kg, the pre-installed pelvis insert should be
removed. (See "Removing the Pelvis Insert")
• Always mount the seat without a child in it.
click
12
Pull the Isofix slide bu��on to slide the Isofix backwards until the seat close as possi-
ble to the back rest of the vehicle's seat, make sure the gap has eliminated.
Pull
Adjusting the Support Leg.
Push the release buttons on both side to
the center direction, and extending the
support leg to the surface of floor until
it fully reaches, make sure you see the
safety display shows GREEN on both side.
CAUTION!
• The seat must be secured with the Isofix sys-
tem even if there is no child is travelling.
• Both Isofix connectors must be anchored
securely and safety displays are all show
GREEN.
• The seat shell are fully locked on the Isofix
base and safety displays are all show GREEN.
• The support leg must fully reaches surface
of floor and the safety displays are all show
GREEN.
13