EN
- Tighten the twist grip knob (5)
(fig. 7) until all four guide rollers (6)
rest on the surface of the pipe or
spigot fitting.
5.
Scraping of pipe surface
• Turn the tool clockwise around the end of the pipe by the roller handle (1).
• Turn it steadily until the pipe surface is scraped up to the mark (Fig. 5).
CAUTION
Risk of injury during scraping process!
Keep hands off the pipe.
NOTICE
Press the scraper tool against the end of the pipe while scraping in order to
avoid tilting of the tool in axial direction.
• The swarf is to be removed manually.
20
fig. 7