Replacement Of Blade; Notes On Care And Maintenance - FRIATEC FWSG 710 L Bedienungsanleitung

EN
8.

Replacement of blade

CAUTION
Risk of injury at the blade!
NOTICE
Please note when replacing the blade that only blades dyed green may be
used!
• Release the TORX screw with the TORX spanner supplied.
• Remove the blade and clean the supporting surface carefully.
• Insert a new blade.
• Tighten the TORX screw with the torx spanner.
Article
FWSGE 5/spare scraper blade
9.

Notes on care and maintenance

Your scraper tool FWSG 710L is a precision tool. Please thus observe the
notes on care and maintenance. All component parts are to be regularly
cleaned of dirt and deposits.
NOTICE
Your expense!
Careful handling of the equipment will prevent unnecessary repairs and downtimes.
Regular annual safety checks by FRIATEC AG are recommended.
The scraper tool FWSG 710L must be kept clean and dry. After use, the tool is
always to be stored in the dry transport box.
Rollers must be treated regularly using oil-based maintenance spray supplied
in the transport box.
22
Order-No.
613324