Safety; Functional Safety; Obligations Of The Operator; Structural Changes - FRIATEC FWSG 710 L Bedienungsanleitung

EN
2.

Safety

2.1

Functional safety

The scraper tool FWSG 710L is subject to the quality management pursuant
to DIN EN ISO 9001:2008 and is checked for its functional safety before any
delivery.
2.2

Obligations of the operator

All persons involved in commissioning, operation, maintenance and repair of
the scraper tool FWSG 710L must:
• be correspondingly qualified, and
• strictly observe these operating instructions.
The operating instructions must always be kept at the place of use of the tool
(transport box recommended). The instructions must be available to the oper-
ator any time.
With regard to the intended use, please observe the accident prevention regu-
lations, environmental regulations and statutory rules, as well as the relevant
safety regulations and all local standards, laws and regulations.
2.3

Structural changes

No modifications, attachments or alterations on the scraper tool FWSG 710L
may be performed without approval by FRIATEC AG.
16