Prior To Use; Charging The Battery; First Use; Switching The Headphones On/Off - Silvercrest SBKN 4.0 B 1 Bedienungsanleitung Und Sicherheitshinweise

Prior to use

Take the headphones and the accessories out of the packaging and remove all
packaging material completely.

Charging the battery

Before the first use or when the built-in battery is empty, you charge it as
follows:
 Carefully remove the cover from the charging socket (7) and rotate it
sideways.
 Connect the supplied USB charging cable (C) to the charging socket (7) and
a free USB socket of your computer when it is switched on or a USB power
supply (not supplied).
 When charging, the LED (4) indicates the following statuses of the device:
Headphones
not connected
connected
 After charging, disconnect the USB charging cable (C) and put the cover
back on the charging socket (7).
Never cover the headphones while they are charging as they can become
heated.
The orange LED (4) flashes when the battery is low.

First use

Switching the headphones on/off

Switch on the headphones by pressing the multifunction button (3) for at least 2
seconds. You hear an ascending tone sequence in the headphones. The device
Battery is charging
LED lights up orange
LED lights up orange and
flashes blue periodically
SilverCrest SBKN 4.0 B1
Battery is charged
LED lights up blue
LED lights up blue and
flashes periodically
English - 13