Mounting Steps - Lenze EZN3x0060H054 series Montageanleitung

6.4

Mounting steps

Design 1
EZN3A0060H054
ƒ
How to wire the filter:
1. Deenergise the control cabinet and fuse it against re−energisation.
2. Connect the connection cables "Load" 2 to the basic device.
– Observe the mounting instructions for the standard device!
3. Mount the PE conductor to the PE stud 1 using the ring cable lug.
– Observe tightening torque!
4. Connect the mains cables to screw terminal "Line" 0.
– Observe tightening torque!
EDKZNXXXX−003 DE/EN/FR 2.0
Electrical installation
l
Mounting steps
EZNx035a
6
41