Mounting Steps - Lenze EZN3x0060H054 series Montageanleitung

5.2

Mounting steps

Design 1
EZN3A0060H054
ƒ
How to mount the filter:
1. Read the chapter "Mechanical installation" in the documentation of the basic
device. Read up particularly on ...
– Precautionary measures while mounting
– Installation material required
– Compulsory starting torques
– Bore spacings and free spaces
2. When connecting the filter to the standard controller:
– Mount fixing bracket 1.
When connecting the filter to the standard controller in push−through technique or
cold−plate technique:
– Remove the lower part 0 by releasing 6 screws and nuts.
3. Mount the mains filter in the control cabinet.
EDKZNXXXX−003 DE/EN/FR 2.0
Mechanical installation
l
Mounting steps
EZN−034a
5
37